Tips for Installment of Colorbond Roofing

Nowadays, the Colorbond Roofing has brought an insurrection in the world of roofing industry. A few years ago, the metal roof was a budget-friendly alternative, and they were generally used on commercial buildings and sheds. However, things changed after the start of the Colorbond Roofing. The good news is that the colorbond roof is available in many colors. Let’s know how to install the Colorbond Roofing.

Choosing Colorbond Roofing

After the launch of the product, it became increasingly better. Soon many varieties were included in it. Nowadays, you can discover that this Roofing material can meet all your needs:

  1. The product is available in tons of profile shapes for different types of houses.
  2. It contains insulated ceilings to avoid heat. In addition, it moistens the noise.
  3. The great thing is that a heat-reflective roof can help you keep your premises cool.
  4. In the case of the courtyard, where the ceiling is exposed on each side, we recommend that you go for the product that is colorful on each side.

The prices of the product vary. Actually, heat-reflective or insulating colorbond is more expensive than the primary Colorbond Roofing. According to an estimate, they can help you save up to 50% on your cooling costs. Therefore, the additional cost is worth it.

Remember: the colorbond has a full roof system. Therefore, when choosing for a roofing system, we recommend that you go for matching gutter. In other words, you might want to go for a matching color.

Colorbond-Roofing.jpg

The installment of Colorbond Roofing

Setting up the Colorbond Roofing is not a mission impossible, but if you do not have the skill, you may not want to do it yourself. Just make sure the roof is installed on an acceptable standard basis. This is to ensure that the roof has been set up correctly and it will not cause risk or danger in extreme weather. Therefore, if you have not done this kind of work before, then we suggest that you search for a professional.

Installation Procedure

  1. First of all, you need to install fascias and gutting.
  2. Before the ceiling, you should install the sliding, which is a reflective foil.
  3. Another option of sliding is the “blanket” insulated.
  4. Actually, colorbond sheets are light. So, you can take them to the roof without any assistance, but they are a bit cumbersome. Therefore, there is a good idea to help.
  5. When inserting sheets, make sure you mark them with a wheel. Also, sheets should be properly harvested.
  6. In addition, gutters should be attached with sheets.
  7. Once the installation is complete, you can clean it well. Small pieces of metal can cover the roof. Therefore, make sure you remove them on a regular basis.

Finally, you might want to keep in mind that you are going to work at a dangerous height. So, you may want to be more careful. Getting quotes from different professionals instead of your work is a good idea.

For a new Colorbond Roofing Adelaide, we suggest you look at All Covers Roofing Services. They provide many relevant Roofing Services at affordable rates.

Colorbond Roofing vs. Zincalume Roofing – The hot debate topic

While renovating a home, one of the important parts is to decide about the type of Corrugated Roof service you need. It’s not just about renovation, it also must be considered while constructing a new home in South Australia.

Generally, there are two types of roofing so far we have heard of: Metal Roofing and Steel roofing. In Steel roofing, there are two options. So, here, the debate is about what to choose for roofing purpose: Colorbond or Zincalume?

This blog is all about the discussion. This discussion will definitely compel to take an appropriate decision.

What’s the best – Colorbond vs. Zincalume?

Steel roof is the perfect as it’s durable and optimized to cope with the constant sunlight. As we know, summers are hotter in Australia; the Roofing must be able to bear the scorching sunlight.

We expect roofing to last for decades hence it is necessary to make a right choice. When quality is of top priority, you can opt for any of the two most popular steel brands, i.e. Colorbond and Zincalume.

Let’s the benefits as well as drawbacks of both:

Colorbond Steel:

From its name “Colorbond Roofing”, we can assume that it must be available in different colours so that people can make a choice that matches or is in contrast with their home colours. Since 1966, it has been winning the hearts of Australians.

Even today, it has sustained its values of durability and adaptability. The design is advanced to provide superior roofing.

Superior points:

  • Available in 22 colours: Now, no need to sacrifice the appearance of your home for the sake of a decent roof, colorbond is available in 22 colors of three different categories i.e. matt, classic and contemporary.
  • Perfect for Australian hot summers:  This steel roofing comes with Thermatech heat reflective technology due to which roofs can withstand the scorching heats.
  • Resistant to corrosion:  The Activate range of Colorbond includes additional magnesium into the steel sheeting. This improves galvanic protection.
  • Insulation concession: Light colours of the colorbond protect the house from scorching heat hence they may be eligible for insulation concession.
  • Hassle free maintenance: Roofs made from colorbond steel hardly fade away due to protracted exposure to ultraviolet rays of the sun. This reduces the costs of repainting the roofs every alternate year.

Inferior points:

  • The only drawback of Colorbond Roofing is it is “expensive” hence used only when quality matters more than quantity.
  • But, if we compare the price with the features available; we can say that money spent is worthy. You can get benefit of every single dollar spent.
  • Keeping the maintenance part in mind, we can say Colorbond Roofing requires less maintenance. It offers affordable payment plans that every Aussie will find affordable.
Colorbond Roofing

Zincalume Steel Roof:

Similar to colorbond, Zincalume is also known for its strength and durability. Made from zinc, silicon and aluminium, tested in all types of weather conditions, it consistently sustains in all types of climates.

Superior points:

  • Long life span: This steel is rust resistant, difficult to scratch and has a long life span.
  • Competitive price: This type of steel roofing is affordable.
  • Less impact on environment: Zincalume steel is recyclable and due to its durability, it has less impact on the environment.

Inferior points:

  • Too much shiny: Shiny nature of the steel can sometimes be an eyesore for the property owners. The steel takes years to fade away, as a result, it cannot be matched with the aesthetics of the house.
  • Less energy efficient: Because of its shiny nature, Zincalume radiates more heat than Colorbond.

So, the question is what you must choose?

Well, if quality really matters for you then go for Colorbond. The reason; just look at its features, it offers everything that a house owner desires for while Roofing. Also, it is available in various colours hence you can select the color as per your own choice.

Discuss the payment plans and once approved, you can get zero deposit and zero interest payment plans.

Once decided, you can ask your Roofing Contractors to provide Colorbond Roofing services.

Five top reasons to choose Colorbond Roofing

A new trend that has risen rapidly in the roof industry over the last few years is a good old strong and cost-effective metal roof! Colorbond Roofing is new black and all the rage with expert architects agree with this simple, humble material, can not only lift the aesthetics of your home, but also add value and save you a few dollars below the track.

Top 5 Reasons to Choose Colorbond Roofing:

1- ENERGY EFFICIENCY AND ENVIRONMENT

-Thermal efficiency: Colorbond Roofing will make your home more energy efficient. Each color in the standard color range (except Night Sky) is characteristic of Thermatech solar reflection technology. This technique is designed to reflect the sun’s heat more in hot days, so you will use less of your air conditioning, and it also reduces heat stress for your roof. Making Colorbond Roofing is a great option for your home, wallet and planet.

– Sustainable Performance: It is becoming more and more important to select the products that not only work well but are also kind to our planet. Colorbond Roofing not only gives you an exceptional product, it also has a permanent display, and thus its long life will conserve the resources and energy needed for low-life products. Colorbond Roofing has recycled material and it is 100% recycled, and Colorbond Roofing is more economical to transport and install due to being a lightweight material. Not only is the Colorbond Roofing strong and attractive, but it is also a responsible choice for your future and our planet.

2- TESTED IN AUSTRALIAN CONDITIONS

Australia’s weather conditions range from warmth and cold to extreme dust, rain, wind and hail. Colorbond Roofing passes through corrosion testing, durability testing, application testing and external exposure testing. When you select Colorbond Roofing for your roof, you can rest assured knowing that it will face the harsh weather conditions, this great country will throw it.

Colorbond Roofing
Colorbond Roofing

3- FIVE LAYERS OF PROTECTION

Made in Australia for Australian standards (AS1397 and AS / NZS 2728) and tested in some of the most harsh Australian conditions over the past 50 years, the real Colorbond Roofing is much more than just ‘steel paint’.

Steel base is constructed to meet relevant Australian standards, which ensures strict adherence to the required grades and strength.

After this, the base is coated with metal coating in the BlueScope industry, in which the active technology is included to provide corrosive resistance.

A thin pre-treatment layer is applied to adapt the adhesion of further coatings.

Corrosion is baked on inhibitory primer surface.

Particularly developed, a topcoat of outer grade paints is ripe for the chipping, flapping and blister resistance and to ensure that the finish retains its look for a long time.

4- FIRE PROTECTION

Whether you live, or plan to build in a bushfire prone area, or just want to increase the bushfire protection you spend on your home, Colorbond Roofing can help protect your property. Because of its non-combustibility Using Colorbond Roofing adds another level of protection to protect your family.

5- EASY TO MAINTAIN

To protect your property, simply wash the Colorbond Roofing with clean, fresh water. Areas like ceilings where paint finishes are naturally washed with rainwater, this is not required. However, those areas which are not exposed to rain water, such as the climbing of the wall under eaves require some maintenance. Just wash them with the tube every 6 months, especially if you live near the sea. It is also important to ensure that no debris is constructed, such as soil and mulch against Colorbond Roofing products.

What are remarkable things in Colorbond Roofing?

Particularly Metal roofing and Colorbond Roofing is quickly becoming the favorite Roofing for homes in Australia. Why? Because Colorbond Roofing is stylish, lightweight, strong, thermal insulated, and the test is highly flexible under Australian weather conditions. This option is certainly worth searching if you are thinking about building or modifying your home, because there are many benefits to using our content.

What is Colorbond?

Colorbond is a coated steel roofing material that has gained rapid popularity over the years, and is now used in many Australian homes. It is long lasting, resistant to different weather conditions, and looks good to any home.

Colorbond Roofing vs. Tile Roofing

1 – Strength

Colorbond Roofing is a light but very strong material. It can endure severe winds, termites are resistant, and non-combustible. It is also resistant to rust, scratching, peeling and breakdown. On the other hand, tiles in the strong winds are more likely to fly and they disappear easily.

Apart from this, due to the light flare of the material, there is almost no structural weight stress when setting up Colorbond, which is in contrast to tiles, which leads to more weight.

2 – Long lasting and low maintenance is needed

Colorbond Roofing is very strong and it does not require much maintenance. The color is literally tied to metal, which means that painting is not required. Colorbond Roofing has also been baked, making it harder and unlikely to leak and leak, such as tile often.

3 – Design friendly

Along with giving your home a modern and minimal look, Colorbond comes in different colors, so you can choose the person who suits your home and set it straight. On top of it, the Colorbond Roofing sheet is available in a series of profiles so that the design of your home can be tailored to perfection.

Due to its mild nature, Colorbond Roofing also offers more spanning capability. This means that to get the roof you need fewer pillars around your house, which can get more versatile and open floor space.

4- Insulation

Colorbond Roofing is a highly thermal efficient material, and in both summer and winter it separates your home from extreme temperatures. It radiates less heat, optimizes solar reflection, and it cools faster than tiles at night, especially when used in light colors.

5 – Easy installation

Colorbond comes in metal sheets up to 100 meters long, which means that it is really easy to roll on the site without the need for lap joints.

6 – Waterproof

The water leaves very easily with the Colorbond Roofing. In some areas, instead of pooling of water, as with tiles, steel roof rackets are made to eliminate rain water quickly and easily, causing less risk for leakage in your home. .

7 – Environment friendly

Metal Roofing is 100% recycled, and is one of the most used products from there. It is not only efficient for transport, but also reduces the environmental impact of construction sites, contributes to wastage on the site.

8 – Cost

Even though buying tiles is cheap, but the final cost will really depend on whether you add additional insulation, installation costs, possibly painting, and future maintenance requirements. Colorbond Roofing can help keep bills low because it is for great built-in insulation, and requires very little maintenance after installation. That’s why, for many people, Colorbond Roofing is cheaper than working.

Colorbond Roofing or Tiles Roofing?

While more and more people are shifting to Colorbond Roofing while building their homes, eventually it comes for all personal preference.

Tiles are a more traditional option, and many people give a look to the favoured home. They are used in Australia for the past 75 years, although the methods of tiling and Metal Roofing are popular today, because the benefits and lightness of the tile bone are seen moving ahead with the benefits provided by tiles.

While making your decision, noise is something you should consider. Colorbond Roofing is not known for its sound proofing properties; Tiles are cool, especially when it rains. Many people make drip-drop noise against the roof of the metal, but others make it a little disturbing.

It is also possible that in some cases it may be easy to modify tiles if you want to add a sketch or extension later, though the difficulties of using Colorbond are negligible.

Overall, Colorbond Roofing keeps many advantages over conventional tiles. But, at the end of the day, you have to decide on the basis of roof properties and aesthetics for your home.

The Importance of installing COLORBOND Roofing and Guttering

Gutters, while expensive and some of the times ugly, serve a few essential and some really critical capacities. In any structure, keeping the ground encompassing the establishment as dry as conceivable is basic. Wet soil near the establishment can prompt extreme auxiliary issues. Guttering helps control this issue by taking rainwater that falls on the rooftop and emptying it away out of the establishment.

It’s no surprise that guttering, fascia and downpipes produced using COLORBOND steel is such a prevalent decision for business and mechanical building applications. Regardless of whether your home has a COLORBOND steel rooftop or not, COLORBOND steel is a decent decision for your drain, sash and downpipes. You can flawlessly match or supplement your rooftop shading and other building materials and, when kept up and introduced accurately, be sure of durable execution. Accessible in the full scope of 22 colors,All Covers’ newest age COLORBOND Metal Fascia, gutter and downpipes are made with indistinguishable five-layer framework from our material, presenting to you the advantages of Activate innovation, and the consolation of 50 years of COLORBOND steel testing under known harsh Australian conditions.

Clearly, you would prefer not to enter or leave your home and get drenched by a cascade originating from above. Gutters gather rain from your rooftop and convey it to the ground without pouring everywhere. Their main purpose is to collect the rain far from your rooftop and onto the ground in a controlled manner.

Indeed, even before we take a gander at progressively genuine long term harm issues, we can see an advantage from utilizing gutters in the method for anticipating recoloring, in favor of your home. Without guttering and downspouts, you would almost certainly observe recoloring harm in favor of your home because of sprinkling water incurring significant harm throughout the years. The look of your house is a key part of its esteem when you choose to move, so keeping quality water seepage set up is an interest in your future.

Building models and the manner in which we keep up houses has changed after some time. Thirty years ago, even the least expensive houses introduced gutters. A significant number of these old houses will in any case be intact in a 100 years.

Today, we assemble houses with less worry for good building practices and uncover tremendous zones of divider to rain. Mortgage holders who don’t introduce guttering on their rooftops can’t anticipate that their dividers will endure forever. If not took care of, fix costs will take off – if still unattended, will truly impact basic respectability and the estimation of your property.

Except if you have a framework that forestalls leaves, branches and flotsam and jetsam from getting into your drains, you most likely must have to get your canals cleaned once every year. On the off chance that they are not kept clean, ice dams can shape in winter, which may cause your rain drains to sag or get drawn far from your home.

A legitimately introduced guttering framework will incorporate consistent canals on each slanted rooftop edge. The drains ought not hold standing water, ought not spill, ought to be safely affixed to the sashes, and ought to have downspouts that are safely attached to the outside of the house.

All Covers are your nearby Roofing Service providers and pros in private COLORBOND Metal Roofing.A professional with COLORBOND Metal Fascia and gutters, All Covers brag of a fulfilled customer service over South Australia. Our material arrangements can significantly enhance the viewpoint of your home when you consider Re-Roofing with COLORBOND guttering.

What’s better: Colorbond Roofing or Concrete Tiles?

Colorbond Roofing

When it comes to construction of roofs, for Australian people; two types of Colorbond Roofing systems are known to them, i.e. Colorbond roofing or Concrete Tiles roofing. Now, the question is; among these two, which is best suitable?

Both options can easily survive in the climate. Let’s first have a brief overview of both of these options:

  1. Colorbond: This is the method in which the galvanized surface is bonded with the paint. This concept was then further developed in Australia. It is resistant to corrosion.

Colorbond is available in various colors. Colorbond roofing can last long for 50 years or more.

  1. Ceramic Tiles: Another option is concrete tiles roofing. The terra cotta ceramic tiles will last permanently.

Seems like both options are useful and are recommended the most, but then how can we decide which one is the best.

Older suburbs in Australia have concrete ceramic tiles roofing. So, what’s the difference between the two?

Why would some prefer one over the other Colorbond Roofing?

If the design, color that you admire is unavailable in ceramic category, it may be available in Colorbond Roofing.

Let’s take a look a few factors based on which appropriate selection can be done:

  1. Look and Feel: People who are creative will love to have Colorbond roofing as it provides modern fashionable look and feel.

There are several such tile accounts that offer different architectural view as compared to those of ceramic tiles.

You can choose roof shingles design with the color of your choice. There are also other colors in concrete roofing systems. You can select any one among them.

2. Noise: Colorbond Roofing can moisten and may make noise whereas those of ceramic tiles are much quieter.

If you love to listen to that natural sound of rain drops, Colorbond is for you. If you are peaceful nature lover, Tile roofing is for you. 

3. Water collection: Do you use roofing water at home?  If the answer is yes, you must opt for Colorbond Roofing as concrete tiles absorb water quickly. Ceramic tiles roofing can preserve dirt which gets washed away in the water container.

At the time of droughts in Melbourne, the demand for Colorbond roofing increases.

4. Bushfire: Cities in Adelaide are highly influenced by bush fires during summer seasons.  If your location is in the fire prone areas, the laws of bushfire will recommend Colorbond roof covering.

If you are thinking about the budget, then concrete roofing is cheaper than Colorbond Roofing.

This is the reason majority of homes in Australia have concrete roofing.  For you, if quality is important, go for Colorbond Roofing Services.

Conclusion:

Think wisely, take your own time; consider these as well as other such factors before taking the decision. Identify which one will be the best for you; Residential Colorbond Metal Roofing or Ceramic tiles roofing? Choice is yours…

Roofing contractors are just a call away for all services related to roofing as well as re-roofing.